Numerical simulation and analysis of heat and mass transfer processes in metallurgical induction applications

verfasst von: Egbert Baake, Andrejs Umbrashko, Andris Jakovics
Abstract: Comprehensive knowledge of the heat and mass transfer processes in the melt of induction applications is required to realize efficient metallurgical processes. Experimental and numerical studies of the melt flow in induction furnaces show that the flow pattern, which comprise several vortexes of the mean flow, and the temperature distribution in the melt are significantly influenced by low-frequency large scale flow oscillations. Two-and three-dimensional hydrodynamic calculations of the melt flow, using two-equation turbulence models based on Reynolds Averaged Navier- Stokes approach, do not predict the large scale periodic flow instabilities obtained from the experimental data. That's why the Large Eddy Simulation (LES) numerical technique was approved to be an alternative for the various k- model modifications. The results of the transient 3D LES simulation of the turbulent melt flow revealed the large scale periodic flow instabilities and the temperature distribution in the melt, which both are in good agreement with the expectations based on the data from the experiments. The studies, presented in this paper, demonstrate the possibility of using the threedimensional transient LES approach for successful simulation of heat and mass transfer processes in metallurgical applications.
Organisationseinheit(en): Institut für Elektroprozesstechnik
Externe Organisation(en): University of Latvia
Typ: Aufsatz in Konferenzband
Seiten: 1578-1583
Anzahl der Seiten: 6
Publikationsdatum: 21.07.2009
Publikationsstatus: Veröffentlicht
Peer-reviewed: Ja
ASJC Scopus Sachgebiete: Computernetzwerke und -kommunikation, Steuerungs- und Systemtechnik, Elektrotechnik und Elektronik, Kommunikation
Elektronische Version(en): https://doi.org/10.1109/EURCON.2009.5167852 (Zugang: Geschlossen)

BibTeX

@inproceedings{4fbf8301e3864171a2c1690f96fa01db,
title = "Numerical simulation and analysis of heat and mass transfer processes in metallurgical induction applications",
abstract = "Comprehensive knowledge of the heat and mass transfer processes in the melt of induction applications is required to realize efficient metallurgical processes. Experimental and numerical studies of the melt flow in induction furnaces show that the flow pattern, which comprise several vortexes of the mean flow, and the temperature distribution in the melt are significantly influenced by low-frequency large scale flow oscillations. Two-and three-dimensional hydrodynamic calculations of the melt flow, using two-equation turbulence models based on Reynolds Averaged Navier- Stokes approach, do not predict the large scale periodic flow instabilities obtained from the experimental data. That's why the Large Eddy Simulation (LES) numerical technique was approved to be an alternative for the various k- model modifications. The results of the transient 3D LES simulation of the turbulent melt flow revealed the large scale periodic flow instabilities and the temperature distribution in the melt, which both are in good agreement with the expectations based on the data from the experiments. The studies, presented in this paper, demonstrate the possibility of using the threedimensional transient LES approach for successful simulation of heat and mass transfer processes in metallurgical applications.",
keywords = "Induction melting, Large eddy simulation, Metallurgical processes, Numerical modelling",
author = "Egbert Baake and Andrejs Umbrashko and Andris Jakovics",
year = "2009",
month = jul,
day = "21",
doi = "10.1109/EURCON.2009.5167852",
language = "English",
isbn = "9781424438617",
series = "IEEE EUROCON 2009, EUROCON 2009",
pages = "1578--1583",
booktitle = "IEEE EUROCON 2009, EUROCON 2009",
note = "IEEE EUROCON 2009, EUROCON 2009 ; Conference date: 18-05-2009 Through 23-05-2009",
}