РАЗРАБОТКА ИНДУКЦИОННЫХ СИСТЕМ ДЛЯ НАГРЕВА ДИСКОВ

verfasst von: Emil R. Mannanov, Sergei A. Galunin, Alexander N. Nikanorov, Bernard Nacke, Tatiana P. Kozulina
Abstract: The paper presents the experimental and numerical results obtained by the induction heating a steel disk. This study has been aimed at realizing the local uniform heating the disk at minimum temperature departure from 450°С. The system-of-interest included 3-turn inducers and a steel disk heated up. The computer-based investigation results were implemented at a laboratory mock-up. The temperature distribution over the disk material and its changes were recorded by a infrared camera. Simulation of electromagnetic and thermal processes occurring in heating a rotating disk-shaped work piece was carried out using ANSYS APDL base. A comparison between the obtained numerical data and experimental one showed a disagreement of about 5 %. It pointed to an adequacy of simulation carried out. A detailed analysis of the disagreement sources was made.
Organisationseinheit(en): Institut für Elektroprozesstechnik
Externe Organisation(en): St. Petersburg State Electrotechnical University
Typ: Artikel
Journal: St. Petersburg State Polytechnical University Journal: Physics and Mathematics
Band: 12
Seiten: 23-31
Anzahl der Seiten: 9
ISSN: 2304-9782
Publikationsdatum: 06.2019
Publikationsstatus: Veröffentlicht
Peer-reviewed: Ja
ASJC Scopus Sachgebiete: Statistische und nichtlineare Physik, Atom- und Molekularphysik sowie Optik, Mathematische Physik, Physik der kondensierten Materie
Elektronische Version(en): https://doi.org/10.18721/JPM.12202 (Zugang: Offen)

BibTeX

@article{3bbf2265c6eb4ad7b4597eaca07b7590,
title = "РАЗРАБОТКА ИНДУКЦИОННЫХ СИСТЕМ ДЛЯ НАГРЕВА ДИСКОВ",
abstract = "The paper presents the experimental and numerical results obtained by the induction heating a steel disk. This study has been aimed at realizing the local uniform heating the disk at minimum temperature departure from 450°С. The system-of-interest included 3-turn inducers and a steel disk heated up. The computer-based investigation results were implemented at a laboratory mock-up. The temperature distribution over the disk material and its changes were recorded by a infrared camera. Simulation of electromagnetic and thermal processes occurring in heating a rotating disk-shaped work piece was carried out using ANSYS APDL base. A comparison between the obtained numerical data and experimental one showed a disagreement of about 5 %. It pointed to an adequacy of simulation carried out. A detailed analysis of the disagreement sources was made.",
keywords = "electrothermal task, heat treatment, heating with rotation, induction heating, numerical simulation",
author = "Mannanov, {Emil R.} and Galunin, {Sergei A.} and Nikanorov, {Alexander N.} and Bernard Nacke and Kozulina, {Tatiana P.}",
year = "2019",
month = jun,
doi = "10.18721/JPM.12202",
language = "Russian",
volume = "12",
pages = "23--31",
journal = "St. Petersburg State Polytechnical University Journal: Physics and Mathematics",
issn = "2304-9782",
number = "2",
}